It is very hard to find a monopolized product or service in the world today if there is no regulation from the government to protect a certain product. There is an option for almost every product. The same applies to thermal printing. There are two main kinds of thermal printing which are thermal transfer ribbons and direct thermal transfer. As their names suggest, one uses ribbons to imprint information while other does not need the ribbon.
The head life of a current transfer is much longer than that of the direct transmission. The material is in direct contact with the print head in direct current transfer and thus there is no kind of protection. Therefore, there is a lot of wear and tear. The current transmission has a protective back-coating that reduces friction with the head of the printer thus a longer head life.
With the direct current transmission, it is not the same. The dust and debris that may be present in the labels are in direct contact with the print head. In the process of being pulled across the print head, they may burn or physically damage the elements. In the long run, you will have printed out poor quality or premature print head failure.
The printer configuration. There are printers that can do both direct and current transmissions. You can have such and choose which one you prefer. However, there are the printers specifically made for the direct current transmission. These are more affordable as they do not have all the hardware needed to support transmission ribbons. This also saves on time as you do not have to constantly change ribbons.
There are both coated and uncoated direct thermal printers. Many people assume that the coated ones are of the best quality and therefore consider only this factor when purchasing the machine. They forget that there are some inferior brands that also have coated printers. In the long-run, they end up spending a lot more on repairs than they would have on an original high-quality printer.
No two products are similar. Even the same brand is bound to have different models. The different models have qualities that make them different from each other. For example, the printers use various amounts of heat and speed. For the best results, go for maximum speed and minimum heat. Too much heat may damage the printing.
Imagine buying a product that does not have instructions or precautions. You may end up running into accidents. All manufacturers should make sure that their products have clear instructions. They also need to choose the method of printing out the information. For long lasting content, current transmission is best. If you are sure that your product may not sell immediately, make sure that the writings are going to last long enough.
There is also the issue of environmental friendliness. There are so many chemicals in the air that the environment keeps deteriorating by the day. Despite its major setbacks, a direct thermal transfer is actually environmental friendly. It does not use as many chemicals as current transmission and thus is better suited for the job.
The head life of a current transfer is much longer than that of the direct transmission. The material is in direct contact with the print head in direct current transfer and thus there is no kind of protection. Therefore, there is a lot of wear and tear. The current transmission has a protective back-coating that reduces friction with the head of the printer thus a longer head life.
With the direct current transmission, it is not the same. The dust and debris that may be present in the labels are in direct contact with the print head. In the process of being pulled across the print head, they may burn or physically damage the elements. In the long run, you will have printed out poor quality or premature print head failure.
The printer configuration. There are printers that can do both direct and current transmissions. You can have such and choose which one you prefer. However, there are the printers specifically made for the direct current transmission. These are more affordable as they do not have all the hardware needed to support transmission ribbons. This also saves on time as you do not have to constantly change ribbons.
There are both coated and uncoated direct thermal printers. Many people assume that the coated ones are of the best quality and therefore consider only this factor when purchasing the machine. They forget that there are some inferior brands that also have coated printers. In the long-run, they end up spending a lot more on repairs than they would have on an original high-quality printer.
No two products are similar. Even the same brand is bound to have different models. The different models have qualities that make them different from each other. For example, the printers use various amounts of heat and speed. For the best results, go for maximum speed and minimum heat. Too much heat may damage the printing.
Imagine buying a product that does not have instructions or precautions. You may end up running into accidents. All manufacturers should make sure that their products have clear instructions. They also need to choose the method of printing out the information. For long lasting content, current transmission is best. If you are sure that your product may not sell immediately, make sure that the writings are going to last long enough.
There is also the issue of environmental friendliness. There are so many chemicals in the air that the environment keeps deteriorating by the day. Despite its major setbacks, a direct thermal transfer is actually environmental friendly. It does not use as many chemicals as current transmission and thus is better suited for the job.
About the Author:
You can get excellent tips on how to choose a supplier of thermal transfer ribbons and more information about a reputable supplier at http://www.vantageid.com/product-category/label-ribbon-supplies/thermal-transfer-ribbons right now.
No comments:
Post a Comment